field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionJob Title: Quality InspectorPay: $20.00/hrShift: 2nd Shift | 3:00 PM - 11:00 PM 3rd Shift | 11:00 PM - 7:00 AMLocation: Athol, MA

Quality Inspector

<h3>Job Description</h3>
Job Description
Description
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Exclude technicians working in production or quality assurance.
Your duties and responsibilities include the following:
• Perform integration, assembly, and test of new systems vehicles and auxiliary equipment from work instructions and assembly drawings
• Perform testing and troubleshooting with engineering and software development in order to identify and correct system level problems with vehicles and auxiliary equipment
• Must be able to read and understand diagnostic data
• Must be able to read and understand Technical schematics
• Must be able to setup and use test equipment including oscilloscopes, signal generators, and other input/output electronic test equipment
• Must be familiar with general computer operation
• Must be able to perform basic soldering
• Performs diversified duties to troubleshoot PWBA's, Assemblies and Modules
• Troubleshoot complex Analog and Digital circuits to the component level
• Make recommendations to improve current procedures and assist Manufacturing Engineering in implementing new procedures
• Work within limits of prescribed procedures to produce a sufficient quantity of working PWBA's, Assemblies or Modules to support the Master Production Schedule
• Discuss technical problems encountered while troubleshooting or testing with Engineering
Skills &amp; Qualifications
Associates Degree or other 2 year technical degree in related discipline and 3 years of related experience; or High School Diploma or equivalent and 5 years related experience.
Must be able to obtain and maintain a secret clearance 
Bonus points for...
J-STD soldering certification, or ability to obtain
IPC 610 certification for the Acceptability of Electronic assemblies, or ability to obtain
IPC 620 certification for Requirements and Acceptance for Cable and Wire Harness Assemblies, or ability to obtain
Job Type &amp; Location
This is a Contract position based out of Pocasset, MA.
Pay and Benefits
The pay range for this position is $25.00 - $37.50/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
 • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Pocasset,MA.
Application Deadline
This position is anticipated to close on Dec 5, 2025.

About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email <a href="mailto:actalentaccommodation@actalentservices.com" target="_blank">actalentaccommodation@actalentservices.com</a> for other accommodation options.

Electro-Mechanical Technician

<h3>Job Description</h3>
Job DescriptionBenefits: 
<ul>
<li>401(k)</li>
<li>401(k) matching</li>
<li>Dental insurance</li>
<li>Health insurance</li>
<li>Paid time off</li>
</ul>
 Quality Engineer COMPANY OVERVIEW: Sage Product Development, Inc. provides fast, efficient and creative product development and manufacturing services to medical device companies. We are a focused team of experienced medical device engineers who know what it takes to develop successful products for startups, multinational companies, and everyone in between. We combine a high level of experience with a low overhead company structure. We are all about solving client companies technical challenges and meeting their product development needs in a timely, efficient and highly personalized manner. We offer the right candidate the opportunity to work in an entrepreneurial environment, enhance their quality engineering abilities, and build their network within the industry. GENERAL SUMMARY: 
<ul>
<li>Ensure the companys continued compliance with relevant quality standards.</li>
<li>Play a key role in establishing and maintaining low-volume medical device manufacturing capabilities at Sage.</li>
<li>Contribute to the success of product development projects by providing quality engineering expertise.</li>
</ul>
 ESSENTIAL JOB FUNCTIONS (all as required by client companies): Quality Systems: 
<ul>
<li>Develop and maintain quality assurance procedures and controls to ensure that company operations meet established standards and agency guidelines, with a priority on efficiency and simplicity.</li>
<li>Assure that the companys quality management system is in ongoing compliance with applicable standards and regulations, including ISO 13485:2016 and 21 CFR part 820.</li>
<li>Manage the companys Internal Audit process. Coordinate the activities of outside consultants who provide Internal Audit services. Ensure that appropriate actions are taken as a result of Internal Audits.</li>
<li>Approve Document Change Orders (DCOs) and obtain approvals from others as required.</li>
<li>Manage the companys Calibration and Preventive Maintenance system.</li>
<li>Manage the companys Complaints system.</li>
<li>Manage the companys CAPA system.</li>
<li>Manage the companys Training system.</li>
<li>Manage the companys NCMR and Process Deviations system.</li>
<li>Perform Pest Control monitoring.</li>
<li>Identify, analyze and implement improvements to both manufacturing and design processes.</li>
</ul>
Manufacturing: 
<ul>
<li>Provide Quality oversight in the manufacturing process. Review and approve manufacturing documentation such as routings, inspection reports, NCMRs, etc.</li>
<li>Manage the companys Supplier Management system. Ensure that suppliers are qualified as required. Develop, implement and manage processes for tracking supplier performance.</li>
<li>Perform component, assembly and finished-goods inspection. Identify, procure and maintain required inspection equipment. Perform and document component, assembly and finished-goods inspection.</li>
<li>Manage the companys NCMR system. Participate in NCMR disposition determination and documentation. Make decisions regarding product and material discrepancies and initiate appropriate action to prevent subsequent problems or discrepancies.</li>
<li>Maintain the cleanroom. Ensure ongoing cleanroom environment monitoring, microbial monitoring, and annual certification.</li>
<li>Maintain processes to ensure that device packaging and labeling meet regulatory requirements and customers needs. Inspect labels.</li>
<li>Manage the sterilization of devices by outside vendors. Conduct and document sterilization validations.</li>
</ul>
Product Development: 
<ul>
<li>Provide quality engineering expertise in projects to develop medical devices (disposable and reusable), catheters, equipment, implants, and/or packaging. Ensure that products meet performance specifications, regulatory and manufacturing requirements.</li>
<li>Provide Quality Engineering services to client companies.</li>
<li>Interact with client companies in a professional manner. Proactively communicate with client companies to ensure an ongoing two-way exchange of information.</li>
<li>Participate in product verification and validation testing and data analysis.</li>
<li>Conduct or contribute to risk analyses, including Failure Mode and Effects Analyses, Hazard Analysis, and Risk Management Plans and Reports.</li>
<li>Contribute to other project documentation, such as Design Input, Verification and Validation plans, protocols and repor</li>
</ul>
Occasional local travel (i.e. by car). Occasional long-distance travel (i.e. by plane). OTHER DUTIES AND RESPONSIBILITIES 
<ul>
<li>Any other duties as assigned.</li>
</ul>
 REQUIRED COMPETENCIES Customer Focus 
<ul>
<li>Provide professional, reliable and prompt service to client companies and coworkers. Work in partnership with others to meet or exceed customer expectations. Interpret customers needs and take appropriate action. Follow through on customers inquiries in a professional and timely manner.</li>
</ul>
Management of Resources 
<ul>
<li>Work in an organized and time effective manner. Proactively seek out relevant reference materials as necessary. Take initiative for self-development. Prioritize tasks effectively. Demonstrate initiative and innovation in the use of available resources.</li>
</ul>
Communication Skills 
<ul>
<li>Write and speak in a concise, technically accurate, timely, and professional manner. Exhibit strong verbal presentation and negotiation skills. Interact with client company personnel in a positive and professional manner. Express ideas, recommendations, and solutions clearly, logically, and concisely in both written and verbal communications. Demonstrate tact and diplomacy in communications. Demonstrate active listening skills and ability to resolve discrepancies with customers.</li>
</ul>
 PREPARATION, KNOWLEDGE, SKILLS &amp; ABILITIES: 
<ul>
<li>Bachelor's degree in Engineering or relevant science is required. Masters degree in engineering, management or business is a plus.</li>
<li>One or more years of medical device quality engineering experience is required.</li>
<li>Commitment to satisfying quality and regulatory requirements in a way that maintains and promotes efficiency of operation is required.</li>
<li>Ability to interact with client companies in a professional manner.</li>
<li>Knowledge of probability and statistics.</li>
<li>Proficiency with commonly used computer software such as Excel, Word, PowerPoint, etc.</li>
<li>Flexibility, persistence, resourcefulness, a drive to succeed, and an entrepreneurial spirit.</li>
</ul>
 SUPERVISORY RESPONSIBILITY: 
<ul>
<li>May direct the work of other people, and may have direct reports.</li>
</ul>
REPORTS TO: Director of Quality WORKING CONDITIONS/PHYSICAL DEMANDS: 
<ul>
<li>Must be able to move throughout office and laboratory space, using a complete variety of office equipment and laboratory machinery and tools. Must be able to lift more than 50 pounds and stand for extended periods of time. Must tolerate exposure to chemicals found in a laboratory environment.</li>
<li>The above statements are intended to describe the general nature and level of work being performed by people assigned to do this job. The above is not intended to be an exhaustive list of all responsibilities and duties required.</li>
<li>External and internal applicants, as well as position incumbents who become disabled as defined under the Americans with Disabilities Act must be able to perform the essential job functions (as listed) either unaided or with the assistance of a reasonable accommodation to be determined by management on a case by case basis.</li>
</ul>

Quality Engineer

<h3>Job Description</h3>
Job Description
Product Development / Mechanical Design Engineer High Speed IO Connectors
Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We are currently seeking a Product Development Engineerto join our team. The position will be locatedin Nashua, NH.
Position Overview
Amphenol is seeking a highly skilled and motivated Senior Product Development Engineer to lead the design and development of high speed IO connectors. This role is pivotal in advancing connectivity solutions for next-generation AI/ML platforms and high-bandwidth data center applications. The engineer will serve as the technical owner for a specific form factor, driving innovation, customer engagement, and cross-functional execution.
Key Responsibilities
Design &amp; Innovation
<ul>
<li>Lead concept generation, design, and qualification of high speed IO connectors for 112Gb+ signaling.</li>
<li>Develop connectors optimized for AI/ML workloads with emphasis on signal integrity, mechanical robustness, and thermal efficiency.</li>
<li>Apply advanced design techniques for low latency, high-density packaging, and manufacturability.</li>
<li>Collaborate with cross-functional teams to ensure system-level integration and compliance with industry standards (e.g., OSFP, QSFP-DD, PCIe).</li>
</ul>
Testing &amp; Validation
<ul>
<li>Define and execute rigorous testing protocols for electrical, mechanical, and environmental performance.</li>
<li>Perform Design FMEA, Tolerance Analysis, DFM, FEA (ANSYS preferred), and Risk Analysis.</li>
<li>Work with internal labs and external partners to validate performance in real-world environments.</li>
</ul>
Project Management
<ul>
<li>Manage development projects from concept through production, including timelines, deliverables, and cross-functional coordination.</li>
<li>Maintain clear documentation and communication across engineering, manufacturing, and quality teams.</li>
<li>Support NPI and transition to manufacturing.</li>
</ul>
Customer Engagement
<ul>
<li>Act as the primary technical interface forcustomer engagements.</li>
<li>Translate customer requirements into actionable design goals and provide support during design reviews, prototyping, and field validation.</li>
<li>Present product concepts early in the development cycle and incorporate feedback into design iterations.</li>
</ul>
Qualifications
<ul>
<li>Bachelor's or Master's degree in Mechanical or Electrical Engineering.</li>
<li>5+ years of experience in connector or high-speed product development.</li>
<li>Proficiency in CAD tools (SolidWorks, Creo) and simulation software (ANSYS).</li>
<li>Strong understanding of signal integrity, EMI/EMC, and thermal management.</li>
<li>Experience with materials and manufacturing processes including stamping, plating, molding, and assembly.</li>
<li>Excellent communication skills with global teams and customers.</li>
<li>Ability to manage multiple projects and prioritize effectively.</li>
</ul>
Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business.
Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin
For additional company information please visit our website at<a href="http://www.amphenol-cs.com" target="_blank">www.amphenol-cs.com</a>
#LI-PG2

Product Development / Mechanical Design Engineer

<h3>Job Description</h3>
Job DescriptionJob Description
The machine operator will be responsible for running and maintaining an automated screw machine. This includes unloading and loading the machine with raw materials, setting up the machine, and inspecting finished products before sending them to the next work station. Routine maintenance, such as oil changes and coolant changes, is also required.
Responsibilities
<ul>
<li>Run and maintain an automated screw machine.</li>
<li>Unload and load the machine with raw materials.</li>
<li>Set up the machine for operation.</li>
<li>Inspect finished products before sending them to the next work station.</li>
<li>Perform routine maintenance, including oil changes and coolant changes.</li>
<li>Sweep, clean, mop, pack, unpack, move raw materials, and remove finished products from bins.</li>
<li>Monitor the machine while the operator is on break.</li>
</ul>
Essential Skills
<ul>
<li>Experience in machine operation and minor maintenance.</li>
<li>Ability to read and interpret blueprints.</li>
<li>Mechanical skills and aptitude.</li>
<li>Proficiency in using hand tools.</li>
<li>Troubleshooting skills.</li>
</ul>
Additional Skills &amp; Qualifications
<ul>
<li>High School diploma or equivalent.</li>
</ul>
Job Type &amp; Location
This is a Contract to Hire position based out of Agawam, MA.
Pay and Benefits
The pay range for this position is $19.00 - $19.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Agawam,MA.
Application Deadline
This position is anticipated to close on Nov 23, 2025.

About Aerotek:
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. 
<h3>Company Description</h3>
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Machine Operator

<h3>Job Description</h3>
Job Description
This position is a DIRECT HIRE ROLE from day one
<ul>
<li>Setup and operate CNC milling five axis machines</li>
<li>Using cutting tools as well as speeds and feeds associated with tooling</li>
<li>Understanding of process to achieve tight tolerance</li>
<li>Making calculations for programming including where material should be cut</li>
<li>Translating instructions into a computer automated manufacturing program</li>
<li>Reading blueprints</li>
<li>Communicating with engineers and clients who will use the program</li>
<li>Preparing geometric layout of design using proper software</li>
<li>Writing programs and modify existing ones for increased efficiency</li>
</ul>
Requirements:
<ul>
<li>At least five years previous experience of CNC milling five axis machines</li>
<li>Good math skills, written and verbal skills</li>
<li>Knowledge of a metal shop work</li>
<li>Able to read blueprints</li>
</ul>
Hours:
Monday through Friday – 7am to 3:30pm and they are offering some overtime now.
The pay is up to $40.00 plus an hour based on experience
Benefits:
<ul>
<li>Health insurance – Harvard Pilgrim - company pays 60%</li>
<li>Dental Insurance – Ameritas - company pays 30%</li>
<li>Vision insurance – Ameritas VSP Network</li>
<li>Group life/voluntary life insurance</li>
<li>Accrued paid time off</li>
<li>9 paid holidays</li>
<li>401K with contributions</li>
</ul>
 
Company DescriptionWe are here to help We represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies. Direct Hire Placement 75% of our placements Temporary to Hire Placement 28% of our placements Temporary Placement 2% of our placements We are here to help you find that permanent job that you are seeking. Lynda St. Andre 22 years of service Rachel St. Andre 6 years of service Gorette Tibbetts 16 years of service 
<h3>Company Description</h3>
We are here to help\r\n\r\nWe represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies.\r\n\r\nDirect Hire Placement 75% of our placements\r\nTemporary to Hire Placement 28% of our placements \r\nTemporary Placement 2% of our placements\r\n\r\nWe are here to help you find that permanent job that you are seeking. \r\n\r\nLynda St. Andre 22 years of service\r\nRachel St. Andre 6 years of service\r\nGorette Tibbetts 16 years of service

Milling Machinist $40/hour - Direct hire

<h3>Job Description</h3>
Job Description
This position is a DIRECT HIRE ROLE from day one
Responsibilities:
<ul>
<li>Set-up and operates Amada Press Brake</li>
<li>Bend and form sheet metal</li>
<li>Sheet metal fabrication including shearing, notching, punching holes and bending sheet metal</li>
<li>Working with blueprints, layout, and templates.</li>
<li>Creating operation steps including calculating dimensions</li>
</ul>
Qualifications:
<ul>
<li>Previous experience with Amada Press Brake</li>
<li>Experience in reading blueprints</li>
<li>Precision sheet metal experience</li>
</ul>
Hours are:
Monday through Friday - 1st shift
The pay is up to $35.00 an hour based on experience
 
Company DescriptionWe are here to help We represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies. Direct Hire Placement 75% of our placements Temporary to Hire Placement 28% of our placements Temporary Placement 2% of our placements We are here to help you find that permanent job that you are seeking. Lynda St. Andre 22 years of service Rachel St. Andre 6 years of service Gorette Tibbetts 16 years of service 
<h3>Company Description</h3>
We are here to help\r\n\r\nWe represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies.\r\n\r\nDirect Hire Placement 75% of our placements\r\nTemporary to Hire Placement 28% of our placements \r\nTemporary Placement 2% of our placements\r\n\r\nWe are here to help you find that permanent job that you are seeking. \r\n\r\nLynda St. Andre 22 years of service\r\nRachel St. Andre 6 years of service\r\nGorette Tibbetts 16 years of service

Amada Press Brake Mechanic $35/hour - Direct hire

<h3>Job Description</h3>
Job Description
This position is a DIRECT HIRE ROLE from day one
&nbsp;
Responsibilities:
<ul>
<li>Setup, operating and programming CNC lathe and/or turning machine</li>
<li>Programming with Mastercam and long hand at the machine</li>
<li>Loading, unloading and checking parts</li>
<li>Reading and interpreting blueprints and customer drawings</li>
<li>Load raw materials and monitor machining processes</li>
<li>Using precision measuring tools such as: micrometers, calipers, gauges</li>
<li>Deburring and washing parts as needed</li>
</ul>
Qualifications:
<ul>
<li>Previous CNC lathe and/or turning experience</li>
<li>Previous experience with Mastercam</li>
<li>Experience reading and interpreting blueprints</li>
<li>Experience with precision measuring instruments, micrometers, calipers, gauges</li>
</ul>
Hours are
&nbsp;
Monday through Thursday – 6am to 4:30pm
&nbsp;
The pay is up to $35.00 an hour based on experience
&nbsp;
Benefits:
<ul>
<li>Health insurance – company pays 100%</li>
<li>Dental insurance</li>
<li>Aflac insurance</li>
<li>8 Holidays</li>
<li>40 hours sick time</li>
<li>Vacation</li>
<li>401K</li>
</ul>
Company DescriptionWe are here to help We represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies. Direct Hire Placement 75% of our placements Temporary to Hire Placement 28% of our placements Temporary Placement 2% of our placements We are here to help you find that permanent job that you are seeking. Lynda St. Andre 22 years of service Rachel St. Andre 6 years of service Gorette Tibbetts 16 years of service 
<h3>Company Description</h3>
We are here to help\r\n\r\nWe represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies.\r\n\r\nDirect Hire Placement 75% of our placements\r\nTemporary to Hire Placement 28% of our placements \r\nTemporary Placement 2% of our placements\r\n\r\nWe are here to help you find that permanent job that you are seeking. \r\n\r\nLynda St. Andre 22 years of service\r\nRachel St. Andre 6 years of service\r\nGorette Tibbetts 16 years of service

Lathe Machinist w/some programming $35/hour - Permanent Role

<h3>Job Description</h3>
Job Description
Responsibilities:
<ul>
<li>Set-up and operates Amada Press Brake</li>
<li>Amada FBD 111-1253 NT Press Brake</li>
<li>Amada HG1303 135 Ton Press Brake</li>
<li>Niagra Ton Press Brake</li>
<li>Bend and form sheet metal</li>
<li>Sheet metal fabrication including shearing, notching, punching holes and bending sheet metal</li>
<li>Working with blueprints, layout, and templates.</li>
<li>Creating operation steps including calculating dimensions</li>
</ul>
Qualifications:
<ul>
<li>Previous experience with Amada Press Brake</li>
<li>Experience in reading blueprints</li>
<li>Precision sheet metal experience</li>
</ul>
Hours are:
Monday through Friday – 7am to 3:30pm
The pay is up to $30.00 an hour based on experience
Company DescriptionWe are here to help We represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies. Direct Hire Placement 75% of our placements Temporary to Hire Placement 28% of our placements Temporary Placement 2% of our placements We are here to help you find that permanent job that you are seeking. Lynda St. Andre 22 years of service Rachel St. Andre 6 years of service Gorette Tibbetts 16 years of service 
<h3>Company Description</h3>
We are here to help\r\n\r\nWe represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the most competitive salaries. We provide all candidates with access to the widest possible range of companies.\r\n\r\nDirect Hire Placement 75% of our placements\r\nTemporary to Hire Placement 28% of our placements \r\nTemporary Placement 2% of our placements\r\n\r\nWe are here to help you find that permanent job that you are seeking. \r\n\r\nLynda St. Andre 22 years of service\r\nRachel St. Andre 6 years of service\r\nGorette Tibbetts 16 years of service

Press Brake Operator - $30/hour

<h3>Job Description</h3>
Job Description
Job title: Quality Inspector, 2nd Shift
Shift: 3:00 PM - 11:30 PM Monday - Friday
Status: Non-Exempt

Job Summary

The Quality Inspector will be responsible for quality inspection/quality assurance activities. This includes interpretation and implementation of quality standards to routine inspection/testing and manufacturing activities. 
Duties and responsibilities
· Develop and maintain strong internal working relationships across restor3d.
· Understand the objectives, responsibilities, and mission of the Quality Control department and work towards those goals.
<ul>
<li>Strong attention to detail</li>
<li>Prioritize and plan work activities; adapt for changing conditions.</li>
<li>Ability to read and interpret prints and apply Geometric Dimensioning and Tolerancing (GD&amp;T) as defined on the print.</li>
<li>Inspect incoming, in-process, finished parts, and materials for conformance to quality control standards.</li>
<li>Must be able to perform 100% inspections of non-conformance reports (NCR’s).</li>
<li>Proficient in the use of hand measuring tools such as calipers, micrometers, dial indicators, etc.</li>
<li>Working knowledge of optical comparators and CMM for inspection.</li>
<li>Understanding of calibration requirements for inspection equipment.</li>
<li>Willingness and ability to embrace new inspection tools and methodologies.</li>
<li>Other responsibilities as assigned.</li>
</ul>
Qualifications and experience
<ul>
<li>High School Diploma, GED, or equivalent work experience.</li>
<li>3+ years’ experience performing inspection within an FDA or other regulated environment.</li>
<li>Ability to read and interpret engineering drawings.</li>
<li>SAP experience a plus.</li>
<li>GD&amp;T certification a plus.</li>
<li>Advanced metrology experience a plus.</li>
<li>Operate and program CMM.</li>
<li>Operate Optical Comparator.</li>
<li>Contribute towards continuous improvement with regards to Quality, efficiency, and customer focused results.</li>
<li>20/20 Vision required with or without corrective lenses.</li>
<li>Manual dexterity to handle tools and equipment of different sizes.</li>
<li>Proficient in the use of hand measuring tools such as calipers, micrometers, dial indicators, etc.</li>
<li> Willingness and ability to embrace new inspection tools and methodology.</li>
<li>Ability to multi-task, perform efficiently, and independently. </li>
</ul>

10,238 Manufacturing Jobs