field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionAs a Press Operator, you will operate a flexographic printing press engaged in the production of printed products in a safe and efficient manner. This includes the set-up of plates, dies, inks, and coatings as specified in the work ticket. In addition, you will complete quality checks to ensure that the printed product meets all functional requirements. As a press operator, you will also load substrates onto the press and record all required production data into the shop floor data collection system. As needed, you will be required to mount or strip plates, make inks, wash up press components, and complete basic housekeeping and preventive maintenance tasks. Essential Duties and Responsibilities: Perform typical press operations to support production department.Review job ticket and work with Press Helper to ensure job is set up properly on the press per required specifications and job notes (ink, dies, stock, plates).Run the job setup on the press and log data related to the job setup in the system.Run the job per specifications and log when completed, noting material used, etc.While running the press, review printed rolls for quality and consistency related to all aspects of the labels including color registration and die cut.Following completion of the job, move finished roll to finishing department and breakdown and clean machine in preparation for the next job.Communicate with Shift Supervisor and/or Production Manager regarding any issues with the labels and dies.Ensure proper data collection for each job, including job notes on material and time variance.Perform basic troubleshooting of the press along with the Press Helper and Supervisor.Maintain the work area and machines in a clean and orderly condition and follow prescribed company policies and safety regulations.Actively participate in continuous improvement activities and participate in additional press operator training when offered or needed.Additional duties as required.QualificationsRequirements:Education and Experience: High School diploma or equivalent.At least three years press operator or printing related production experience.Job Knowledge, Skills, and Abilities: Good communication skills.Must be proactive and detail oriented to catch problems or inconsistencies and bring them to managements attention.Good organization skills to manage multiple different labels each day.Knowledge of press operation and basic troubleshooting.Should be mechanically inclined to grasp the basics of press operation and maintenance.Supervisory Responsibilities: NoneTraining Requirements: Willing to attend required training courses or sessions related to the job as assigned.Physical Demands: Constant lifting, standing, crouching, walking, and associated repetitive tasks.Must be able to lift up to 50 lbs on a regular basis and up to 75 pounds with assistance.Pass a pre-employment drug test and subject to random drug screening.Work Environment: Regular exposure to dust and noise in the production environment.Warehouse temperatures may be influenced by outside temperatures.Regular skin and clothing exposure to ink.Personal Protective Equipment: Safety shoes and eye protection are highly recommended in the production area.
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Flexographic Pressman

<h3>Job Description</h3>
Job Description
Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Additive Manufacturing Engineer for our client in the Sealing Solutions domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately.
Duration: Full-time
Location: Woburn, MA
Salary: $90,000-$100,000/Annually
Role: Additive Manufacturing Engineer
Primary Skills: Engineering
Role Description: The Additive Manufacturing Engineer must have 3+ years of experience. For this role, you must be a skilled Additive Manufacturing Engineer to develop, implement, and optimize metal 3D printing processes for aerospace components. This role will partner with the design, quality, and production teams to deliver parts that meet aerospace standards, performance requirements, and customer needs.
Responsibilities:
- Develop and validate AM processes (DMLS, SLM, EBM).
- Optimize designs for additive manufacturing (DfAM).
- Operate/maintain metal AM equipment and post-processing systems.
- Create build strategies, simulations, and parameter sets.
- Conduct material testing, process validation, and troubleshooting.
- Prepare process documentation, work instructions, and quality plans.
- Ensure compliance with aerospace standards (AS9100, Nadcap).
- Support R&amp;D, certification, and qualification of flight-critical hardware.
Qualifications:
- Bachelor’s degree in Mechanical/Materials/Manufacturing Engineering or related.
- 3+ years in additive manufacturing (aerospace/regulated environment).
- Hands-on with metal AM systems (EOS, SLM, GE Additive, etc.).
- CAD &amp; build software (SolidWorks, Magics, Netfabb).
- Knowledge of aerospace material standards and testing.
Education: Bachelor’s degree in Mechanical Engineering, Materials Science, Manufacturing Engineering, or related field.
Experience: Minimum 3+ years of experience
Relocation: This position will not cover relocation expenses
Travel: No
Local Preferred: Yes
Note: Must be able to work on a W2 basis (No C2C)
Recruiter Name: Adil Majeed
Recruiter Phone: 617-848-2307
Benefits:
This is a direct hire position, and the hired applicant will receive our client’s benefits package.
Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Additive Manufacturing Engineer

<h3>Job Description</h3>
Job Description
Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. 
Why Work for SMOC?
<ul>
<li>Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment.</li>
<li>Employer-paid Life Insurance &amp; AD&amp;D and Long-Term Disability for full-time employees.</li>
<li>Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees.</li>
<li>403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees.</li>
<li>Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability.</li>
<li>Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more.</li>
</ul>
Primary Responsibilities:
<ul>
<li>Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections.</li>
<li>Verify unit compliance based on health and safety requirements.</li>
<li>Verify unit conditions for rent reasonableness comparisons. </li>
<li>Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners.</li>
<li>Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field</li>
<li>Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections</li>
<li>Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure</li>
<li>Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed </li>
<li>Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache.</li>
<li>Engage all clients by understanding and addressing their needs whether within or outside the scope of work.</li>
</ul>
<ul>
<li>Attend &amp; participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. </li>
<li>Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. </li>
<li>Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies &amp; procedures. </li>
<li>Other duties as assigned.</li>
</ul>
Knowledge and Skill Requirements:
<ul>
<li>Education: High school diploma or equivalent </li>
<li>Minimum years of related experience: 1-2 years preferred</li>
<li>Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele.</li>
<li> Valid Mass. driver's license and insurance</li>
<li>Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. </li>
<li>Must meet all required DHCD program certifications within 1 year.</li>
</ul>
Organizational Relationship:
<ul>
<li>Directly reports to HQS Inspection Supervisor. </li>
<li>Indirectly reports to Program Director, Assistant Director and Division Director.</li>
<li>Direct reports of this position are none. </li>
<li>Indirect reports of this position are HQS Inspectors.</li>
</ul>
Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. 
Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant’s unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required. 
Remote Work Option: Remote work is permissible in some positions at SMOC depending on the key functions and responsibilities. The Lead Inspector position is eligible to work from home 0% of the week in scheduling coordination with the department manager. 
 
 Monday-Friday; 9am-5pm 35

Lead Inspector, HQS

<h3>Job Description</h3>
Job Description
Join a USA Today Top Workplace!
Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufactures maintain a competitive advantage in the world economy by improving productivity.
The Robert E. Morris Company is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts.
Our customer base is located in the New England states plus northern New Jersey and eastern New York, including the New York metropolitan area and Long Island. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help customers “do more with less.”
Summary of Responsibility:
As a CNC Tooling Sales Engineer, you will be responsible for being an important support function in the capital equipment sales process by providing technical information required to improve productivity of machine tool users. Working with various internal departments to provide accountability and follow-up for our customers. 
What You Will Contribute:
<ul>
<ul>
<li>Developing and maintaining customer relationships to ensure all needs are met from pre-sales to project completion by actively reviewing processes and reporting through Salesforce</li>
<li>Maintaining an in-depth knowledge of the machine tool industry and the product lines represented by our company</li>
<li>Supporting a broad range of tooling and machine accessory projects within a sales territory and establishing yourself as the central knowledge base for the associated machine accessories, work holding, and tool holding products</li>
<li>Developing solutions for process optimization and managing related projects from concept to completion</li>
<li>Participating in continuous education meetings, seminars, and training sessions to stay current with new products, processes and technologies</li>
<li>Cultivating a sales territory to generate revenue when not supporting capital machine projects</li>
<li>Being responsive to customers and capital sales account managers in resolving issues promptly and professionally</li>
<li>Maintaining a high degree of integrity and professionalism that safeguards the trust and confidence of customers, and colleagues.</li>
</ul>
</ul>
Qualifications &amp; Competencies:
<ul>
<ul>
<li>Engineering Degree (or related field) preferred with 3+ years of applicable experience</li>
<li>Intermediate to sophisticated knowledge of CNC machine technology and applications with experience in a manufacturing environment</li>
<li>Proficiency with Microsoft Office Suite and the ability to interpret instructions provided in written, oral, diagram, or schedule form</li>
<li>Deep-seated desire to win in a competitive marketplace</li>
<li>Strong organizational and time-management skills</li>
<li>Ability to excel in a team environment as well as when working independently</li>
<li>Bring a strategic approach to all of your work and creativity for solving challenges</li>
<li>Strong interpersonal and presentation skills – must be able to effectively present products and information to customers in one-on-one and group settings</li>
<li>Ability to communicate professionally in oral and written exchanges</li>
<li>Experience with Salesforce or another CRM is a plus</li>
<li>Ability to manage occasional long-distance travel</li>
<li>Possess a valid US driving license and a clean driving record</li>
<li>A valid US Passport is a plus</li>
<li>Frequent travel throughout a regional sales territory is required</li>
<li>Public speaking and/or product presentation experience</li>
<li>CMTSE Certification</li>
<li>Project Management experience</li>
<li>Lean Manufacturing training/experience</li>
</ul>
</ul>
Other Functions:
<ul>
<li>Perform related duties as required</li>
</ul>
The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position.
What’s in it for You:
We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:
<ul>
<li>Competitive starting salary</li>
<li>Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance</li>
<li>Paid Time Off, starting with 23 paid days off in your first year.</li>
<li>10 Company Paid Holidays</li>
<li>401(k) retirement plan with company contribution</li>
<li>Tuition reimbursement</li>
<li>Employee appreciation events and perks</li>
<li>Employee Assistance Program</li>
</ul>
Mental and physical requirements: 
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
<ul>
<li>Must be highly mobile, able to access all areas of the premises.</li>
<li>Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects.</li>
<li>Ability to sit for prolonged period of times.</li>
<li>Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees.</li>
<li>Ability to frequently use hands and arms.</li>
<li>Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus.</li>
<li>Ability to keep their composure with the public and co-workers in everyday, stressful situations.</li>
</ul>
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. 
Requisition ID #: 1418B, Nashua NH

CNC Tooling Sales Engineer

<h3>Job Description</h3>
Job Description
<ul>
<li>
Momentum Manufacturing Engineered Extrusions is an aluminum manufacturing plant located in the beautiful lakes region of New Hampshire! We are a growing company with a competitive benefits program and plenty of room for growth! Come join our team! 
 
Job Summary:
We are seeking a skilled and detail-oriented CNC Engineer to join our manufacturing team. The ideal candidate will be responsible for programming, setting up, and optimizing CNC machines to produce high-precision aluminum components, ensuring quality, efficiency, and safety throughout the production process.
Key Responsibilities:
<ul>
<li>Develop and optimize CNC programs for aluminum extrusion machining using CAD/CAM software (e.g., Mastercam, SolidWorks, Fusion 360).</li>
<li>Set up and operate CNC mills and routers to machine aluminum extrusions to tight tolerances.</li>
<li>Collaborate with quality and production teams to interpret technical drawings and specifications.</li>
<li>Troubleshoot machining issues and implement process improvements to enhance productivity and reduce waste.</li>
<li>Select appropriate tooling, fixtures, and cutting parameters for aluminum materials.</li>
<li>Conduct first-article inspections and ensure all parts meet quality standards.</li>
<li>Maintain and calibrate CNC equipment, ensuring proper operation and minimal downtime.</li>
<li>Document processes, setups, and best practices for repeatability and training purposes.</li>
<li>Ensure compliance with safety regulations and company policies.</li>
</ul>

Qualifications:
<ul>
<li>Associate or Bachelor’s degree in Mechanical Engineering, Manufacturing Technology, or related field (or equivalent experience) preferred.</li>
<li>3+ years of experience in CNC machining.</li>
<li>Proficiency in reading and interpreting blueprints, GD&amp;T, and technical drawings.</li>
<li>Strong knowledge of CNC programming and CAM software.</li>
<li>Familiarity with quality control tools such as calipers, micrometers, and CMMs.</li>
<li>Excellent problem-solving skills and attention to detail.</li>
<li>Strong communication and teamwork abilities.</li>
</ul>

Preferred Qualifications:
<ul>
<li>Experience in an aluminum extrusion manufacturing environment.</li>
<li>Knowledge of lean manufacturing and continuous improvement methodologies.</li>
</ul>
</li>
</ul>

CNC Engineer

<h3>Job Description</h3>
Job DescriptionSalary: 
PURPOSE:
<ul>
<li>Inspects materials to ensure they comply with defined requirements. </li>
</ul>
RESPONSIBILITIES:
<ul>
<li>Ensure that materials entering operations department meet design and customer requirements by inspecting and confirming dimensions, visual/cosmetic attributes, functional requirements, and supporting documentation</li>
<li>Compare measurements against established requirements, determine pass/fail, and document any non-conforming material</li>
<li>Conduct Coordinate Measuring Machine (CMM) part setup and operation utilizing fixturing and probe calibration</li>
</ul>
<ul>
<li>Develop inspection methods and set-ups</li>
</ul>
<ul>
<li>Develop and use Inspection Sampling Plans with assistance of the QA Manager and QA Engineering</li>
<li>Originate and maintain all inspection records</li>
</ul>
<ul>
<li>Originate Nonconformance Reports in the internal system</li>
<li>Support MRB (Material Review Board) activities</li>
<li>Perform mechanical calibration of inspection and measurement tools and administers calibration system</li>
</ul>
 
EDUCATION AND EXPERIENCE:
<ul>
<li>High School Diploma required</li>
<li>Associate Degree in related field or certificate from technical school highly preferred.</li>
<li>ASQ Certified Inspector preferred</li>
<li>2 years-experience inspecting product in an ISO 9001 manufacturing environment</li>
<li>CMM programming software knowledge</li>
</ul>
KNOWLEDGE AND SKILLS:
<ul>
<li>Proficient in the use of inspection and measurement hand tools (calipers, micrometers, height gauge, etc.)</li>
</ul>
<ul>
<li>Ability to read and decipher blueprint layouts &amp; GD&amp;T</li>
</ul>
<ul>
<li>Ability to read electrical/mechanical diagrams, spec sheets, and outline drawings</li>
<li>Good communication skills, verbal and written</li>
<li>Strong organizational skills and the ability to successfully complete multiple tasks within established and changing deadlines</li>
</ul>
WORKING CONDITIONS:
<ul>
<li>Standing 95%</li>
<li>Lifting up to 50 lbs.</li>
</ul>
We offer full benefits and competitive compensation.
Hourly range: $22.53 - $30.48 depending on experience
Benefits:
<ul>
<li>401(k) with generous match</li>
<li>Dental insurance</li>
<li>Employee discount</li>
<li>Flexible spending account</li>
<li>Health insurance</li>
<li>Life insurance</li>
<li>Paid time off</li>
<li>Parental leave</li>
<li>Tuition reimbursement</li>
<li>Vision insurance</li>
</ul>
 
Equal Opportunity Employer - Minorities/Women/Veterans/Disabled
*This organization participates in E-Verify.*

Mechanical Quality Inspector

<h3>Job Description</h3>
Job Description
Quality Lead Inspector
MBRAUN Incorporated located in Stratham &amp; Newmarket, New Hampshire is a leading manufacturer of high-end technology solutions. Products include gloveboxes, inert gas purification, thin-film technology, isolators, solvent purification and custom system solutions for clean environments.
For over 40 years MBRAUN employees share in the vision of creating a world-class company that can be our customers #1 creative partner. Together with the customer, we determine the best solution package from MBRAUN's range of products and services. For more information please visit <a href="http://www.mbraun.com" target="_blank">www.mbraun.com</a>.
Job Description
M. Braun, Inc. is seeking a reliable and detail-oriented QualityLead Inspectorto join our growing team. This hybrid role combines warehouse operations with quality inspection responsibilities to ensure the accuracy, compliance, and readiness of all materials and assemblies.
Key Responsibilities
Quality Control &amp; Inspection
<ul>
<li>Ability to read and interpret engineering drawings. Candidate should have a high level of GD&amp;T (Geometric Dimensioning and Tolerancing) Inspection experience and verification. Coordinate-Measuring Machine / Vision system experience recommended.</li>
<li>Candidate should be comfortable performing complex inspections and providing explanation as required to end customer or customer representative on-site.</li>
<li>Verification of Supplier First Article Inspection results. Secondary inspections of critical characteristic to correlate with the supplier documentation.</li>
<li>Inspection of complex fabricated and machined parts using measuring equipment including, but not limited to calipers, profilometers, durometers, helium leak detecting equipment; and documenting the results.</li>
<li>Creating and processing nonconformance reports to the extent as directed by the Quality Manager.</li>
<li>Compiling technical documentation and material certification for government orders (or other orders as required).</li>
<li>Assisting the Quality Manager in all areas of the Quality Management System.</li>
<li>Compliance with ISO9001 and NQA-1 procedures and operating instructions.</li>
<li>General Glovebox / Purifier pre-assembly.</li>
<li>Any other duties required for the position.</li>
</ul>
Warehouse Operations
<ul>
<li>Receive, unload, and verify accuracy of incoming shipments</li>
<li>Process inventory transactions in ERP system (Navision)</li>
<li>Pull, stage, and organize materials to support production and assembly</li>
<li>Perform cycle counts, spot checks, and maintain accurate stock levels</li>
<li>Package, stage, and prepare system shipments for delivery</li>
<li>Operate forklifts and material handling equipment (training provided if needed)</li>
<li>Drive company vehicles for material pickup and delivery (DOT certification or ability to obtain required)</li>
<li>Maintain warehouse cleanliness, organization, and compliance with safety standards</li>
</ul>
Job Requirements
The ideal candidate should be detail-oriented and possess excellent communication and organizational skills. This person must be able to stay focused and be able to apply common sense understanding to carry out written and oral instructions.
Job requirements include, but are not limited to:
<ul>
<li>Experience preferred, but willing to train the right candidate</li>
<li>DOT certification or ability to obtain DOT certification</li>
<li>Ability to drive company vehicles, cargo van, box truck, etc.</li>
<li>Ability to use hand and power tools (experience preferred)</li>
<li>Ability to use Microsoft Word, Excel, and Outlook for documentation and communication</li>
<li>Ability to lift 50lbs on a regular basis</li>
<li>Fork truck experience a plus, but not required (must be willing to learn)</li>
<li>Must be able to follow all safety and personnel rules and regulations</li>
<li>Compliance with ISO 9001 standards and procedures</li>
</ul>
Qualifications
<ul>
<li>High school diploma or equivalent required</li>
<li>Experience in warehouse operations, inventory management, or quality control preferred (will train the right candidate)</li>
<li>Strong attention to detail, organizational, and problem-solving skills</li>
<li>Ability to read technical documents, specifications, and BOMs</li>
<li>Proficient in Microsoft Word, Excel, and Outlook; ERP software experience a plus</li>
<li>Valid driver's license; ability to obtain DOT certification required</li>
<li>Forklift experience a plus (training provided)</li>
<li>Ability to lift up to 50 lbs. regularly and work on feet throughout the day</li>
<li>Strong communication skills and ability to collaborate across teams</li>
</ul>
Physical and Mental Requirements
<ul>
<li>Physical Requirement: Balancing; climbing; bending; stooping; crawling; some light, moderate, heavy lifting and carrying; must have fine motor skills; be able to grasp small items; kneeling; pushing; reaching above shoulder; pulling hand over hand; ability to do a repetitive motion; and the ability to stand and walk for most of the day. Mobility requirement enough to move around the warehouse and production areas safely. The ability to wear and use a respirator for certain tasks as required.</li>
<li>Visual Requirement: Must be able to visually read documents, and read from a computer screen</li>
<li>Hearing Requirement: Must be able to hear and speak on the phone and in person to convey information. Must be able to identify hazard sounds and be aware of the environment in the warehouse and on the production floor for personal safety.</li>
<li>Mental Requirement: Comprehension, Organization, Reasoning, Decision Making, Communication, and Mathematics.</li>
</ul>
Benefits
<ul>
<li>M. Braun offers an excellent benefits package which includes health insurance, dental insurance, vision insurance, 401K, life insurance, short-term and long-term disability, flexible spending account, and more.</li>
<li>M. Braun encourages work / life balance through a flexible work schedule, a 38 hour work week.</li>
<li>M. Braun provides Paid Time Off, Holidays, Floating Holidays and Volunteer Time to employees.</li>
<li>M. Braun provides a Gas Assistance Program which provides $1,125.00 annually to covergas to and from work!</li>
<li>Additional perks include company outings, monthly raffles, pizza days, and more!</li>
</ul>

Quality Lead Inspector

<h3>Job Description</h3>
Job Description
Job Summary:
The Manufacturing Engineers primary responsibility will be to develop and implement optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. The Manufacturing Engineer will recommend and implement improvements to production processes, methods and controls. The engineer will be expected to seek continuous improvement in their skills and knowledge as well as the products and processes for which they are responsible; work in a team environment as dictated by need; openly communicate with inter and intra departmental entities and fellow employees; assume a leadership role as opportunity presents itself and become a driving force in pursuit of strategic goals; work with Product Launch Manager, Sales &amp; Marketing Manager and Production Manager; and have delegated responsibility for the successful introduction of new product/ processes. Much of their involvement in projects, processes and product will require hands-on participation and interface.
Essential Duties and Responsibilities:
<ul>
<li>Performs research, design and development of manufacturing processes, including production flow, </li>
</ul>
assembly methods and production equipment. 
<ul>
<li>Prepares and maintains detailed prints of revisions for parts and products for each Customer.</li>
<li>Designs, develops, tests or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods.</li>
<li>Performs product/process analysis for cost reduction, quality improvement and efficiency improvement.</li>
<li>Represents manufacturing on cross-functional teams.</li>
<li>Must be able to work extended hours when required.</li>
<li>Contributes to team effort by accomplishing related results as needed.</li>
<li>Maintains a safe and clean working environment by complying with procedures, rules, and regulations.</li>
</ul>

Required Knowledge, Skills and Abilities:
<ul>
<li>Knowledge of Lean principles and apply lean tools preferred.</li>
<li>3+ years prior Fabrication experience is a must.</li>
<li>Must be able to plan set objectives to ensure follow though</li>
<li>Tasks require use of small hand tools and measurement devices 30-60% of the time.</li>
<li>Tasks require reading of documents and blueprints</li>
<li>Working knowledge of tooling and equipment</li>
<li>Tasks require visual inspections to access work place safety and reading of measurement tools and instruments.</li>
<li>Tasks require good communication skills.</li>
<li>Tasks require tactile and visual inspection of goods and processes.</li>
<li>Tasks require flexibility and adaptability at a rapid pace.</li>
<li>Computer skills are required.</li>
</ul>

Competencies: 
<ul>
<li>Informing: Provides the information people need to know to do their jobs and feel good about being a member of the team, unit, and/or the organization; provides direct feedback and information to individuals so that they can make accurate decisions; is timely with information.</li>
<li>Customer Focus: Is dedicated to meeting the expectations and requirements of internal and external customers: gets firsthand customer information and uses it for improvements in products and services: talks and acts with customers in mind; establishes and maintains effective relationships with customers and gains their trust and respect</li>
<li>Approachability: Is easy to approach and talk to: spends the extra effort to put others at ease: can be warm, pleasant, and gracious: is sensitive to and patient with the interpersonal anxieties of others: builds rapport well: is a good listener: is an early knower getting informal and incomplete information in time to do something about it.</li>
<li>Organizing: Knowledgeable about how organizations function; knows how to get things done both through formal channels and the informal network; understands the origin and reasoning behind key policies, practices, and procedures.</li>
<li>Communication Skills (verbal and written): Is able to write clearly and succinctly in a variety of communication settings and styles; can get messages across that have the desired effect.</li>
</ul>

Engineer

<h3>Job Description</h3>
Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit <a href="http://www.shield.ai" target="_blank">www.shield.ai</a>. Follow Shield AI on LinkedIn, X, Instagram, and YouTube.&nbsp; Job Description: At Shield AI, we are revolutionizing defense technology to protect service members and civilians with intelligent, autonomous systems. Our Hardware Test Engineering team plays a critical role in ensuring the V-BAT remains the most reliable, mission-ready UAV in the industry. We design cutting-edge test solutions—custom-built electrical and mechanical systems that push our hardware to its limits in real-world and extreme environments. As a Senior Electrical Engineer on our Hardware Test team, you will own the design and development of test systems that push our hardware to its limits. From designing custom PCBs and automated test sequences to developing electrical and mechanical test stands, you’ll be at the forefront of ensuring the highest reliability in aerospace hardware. This is a high-impact role where your expertise in power electronics, RF, communications, and automation will help shape the future of intelligent defense systems. This role would require ~25% (1 week/month) travel to our Dallas, TX office. What you'll do:
<ul>
<li>Lead the design, validation, and deployment of advanced test systems for V-BAT’s critical components and subsystems.</li>
<li>Architect PCBs and test interfaces for power electronics, RF, and communication systems.</li>
<li>Develop automated test sequences in Python, ensuring scalability, efficiency, and repeatability.</li>
<li>Design and integrate custom test fixtures, including relays, PLCs, PCBAs, and harnessing.</li>
<li>Own and drive cross-functional design reviews, advocating for design-for-testability (DFT) improvements.</li>
<li>Work hands-on with HASS, ESS, and HALT testing, validating performance in simulated harsh environments.</li>
<li>Be a technical mentor, guiding junior engineers and contributing to Shield AI’s growing expertise in hardware test engineering.</li>
<li>Other duties as assigned.&nbsp;</li>
</ul>
Required qualifications:
<ul>
<li>B.S. in Electrical Engineering or related STEM field.</li>
<li>3+ years of industry experience in hardware design and test engineering (or equivalent experience with advanced degrees).</li>
<li>Deep expertise in electrical design, mechanical, and software engineering principles as applied to hardware test systems.</li>
<li>Ability and willingness to travel up to ~25% (1 week/month) to our Dallas, TX office. </li>
<li>Proven ability to design, implement, and validate multidisciplinary hardware systems in a fast-paced, high-stakes environment.</li>
<li>Track record of ownership—driving projects from concept to execution, delivering exceptional results.</li>
<li>A team-first mindset, with high standards for yourself and others, and a passion for solving complex technical challenges.&nbsp;</li>
<li>Track record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others.&nbsp;</li>
</ul>
Preferred qualifications:
<ul>
<li>Proficiency in Python or another scripting language for test automation.</li>
<li>Hands-on experience with PCB design tools (Altium, KiCAD, Eagle) and CAD software (SolidWorks, NX, CATIA).</li>
<li>Experience working in rugged, high-reliability industries like aerospace, defense, or automotive.</li>
<li>Strong problem-solving skills with the ability to pivot quickly in dynamic, evolving environments.</li>
</ul>
#LI-JM2#LC Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to&nbsp;equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know.&nbsp;
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Senior Engineer, Electrical Test and Rapid Prototype (R4000) (BOS)

<h3>Job Description</h3>
Job Description
Material Inspector 1st Shift 7am-3:30pm Job Overview: Inspects incoming materials and production parts to ensure conformance with Burndy specifications. A Day In The Life Read and understand Burndy product drawings and specifications. Basic understanding of GD&amp;T symbols is necessary. Perform first-piece inspection (FPIR/PSIR/QCIP) on items that are newly produced. Examines material or product for surface defects such as cracks, pits, burrs, finish, visual damage, etc. Use statistical sampling plan as directed. Maintains detailed data records as required. Pull up relevant files (drawings, specifications, ECOs, Deviations, Work Instructions, etc) in enterprise software (ie. Agile and SAP). Able to create an ECO in Agile. Understand and follow the Burndy Quality Manual. Able to understand how this manual relates to the requirements of various external agencies such as ISO, NUPIC and CSA. Performs other duties as required. What will help you thrive in this role To perform this job successfully an individual must be able to satisfactorily perform each of the duties/responsibilities listed above. The requirements listed within are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is frequently required to use hands to finger, handle or feel objects, tools or controls and talk or hear. The employee is occasionally required to stand, walk, sit and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Language and Interpersonal Skills: Able to read and understand relevant documents. Communicate effectively in writing and in person. Able to effectively summarize data findings. Able to develop and maintain positive working relationships as needed (coworkers, engineers, production personnel, etc). Mathematical Skills: Fundamentals of geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities: Some understanding of ISO 9001 standards. 2-4 years related experience and/or training, or equivalent combination of education and experience. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to stand, walk, sit, and reach with hands and arms. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

9,510 Manufacturing Jobs